28 Bell Street, Meadowdale Ext.1
Route 24 Germiston
P.O.Box 15300, Hurlyvale 1611
Republic of South Africa
Tel +27 (0) 11 97 48 487
Fax +27 (0) 11 97 49 704
Produkte
| Components made of die-cast aluminium |
Stator housings, bolted feet, endshields, flanges and terminal boxes made of die-cast aluminium, available in frame size 56 – 180.
Available unmachined and ex-stock, these components can be supplied according to any customers requirements. Smaller batch sizes on machined components are available from existing stock (stator housings to be machined after shrinking-in process only). The stator housings will be supplied with a inner diameter ready for the shrinking-in of the stator pack.
The shrinking-in can be done by ourselves – on request.
| Components made of cast-iron |
Components such as stator housings, endshields, flanges, terminal boxes and various accessories are available from frame size 80 – 400.
Customized and machined components can be supplied according to customer´s drawings.
| Ventilation Fans |
Ventilation fans made of plastic and die-cast aluminium are available with keyway or with clamping device.
Ventilation fans made of die-cast aluminium can be supplied in frame size 80 to 355, either machined or unmachined and balanced.
All ventilation fans are universally suitable for different motor types.
| Custom-made Ventilation Fans |
Unidirectional ventilation fans with a diameter of 250 mm to 2745 mm. Pinhole to be made according to customer´s requirements. Ventilation fans available in either glass-fibre reinforced plastic or aluminium; application temperature – 40 °C to 110 °C and up to 150 °C with aluminium (245 °C *).
Individual air performance can be achieved by the pre-selection of different setting angles of the ventilation fans. The advantage compared with customary ventilation fans is the very good efficiency at a low input power and a low noise level.
Ventilation fans are available as rotating counter clockwise and clockwise fans and - as special versions – suitable for reversing duty.
(*-60°C - 245°C structural dependent with ventilation fans made of aluminium)
| Fan Cowls |
Standardized fan cowls and one-part fan cowls available in frame size 56 – 355.
Rain covers are available in all frame sizes and can also be offered as a complete unit with raim cover welded on to a fan cowl, ready for assembly.
The fan cowls are available either unmachined, primed, galvanized, with/without side punching.
Fan cowls can be individually adapted to all motor types. Diameter,
length and side punching can be selected individually. The fan cowls
can be supplied with hand air cooling notch as well as with special
bores.
| Stator-Packs and die-cast Rotors |
Stator packs and die-cast rotors (three-phase) available in IEC fame size 56 – 355, 2-, 4-, 6- and 8-poles. The standard core lengths are available in frame size 56 – 180 from existing stocks.
As from size 200, we supply on an order basis. The rotors can be supplied in either pure aluminium or casted alloy silumin.
The short-circuit rings are standardized available with fins and studs.
Our stator packs are suitable for the stator housings offered in our delivery programme. Special or customized versions can be made available upon request.
Further, we offer among our delivery programme core stacks and rotor laminations suitable for D.C. motors in frame GM 80-4 up to 132-4.
| Accessories |
Following accessories are part of our delivery programme:
Terminal boards, Terminal box gaskets, motor capacitor, tie rods, slotted cover sheets and clamping collars to customer´s drawing as well as circulation pumps.
| Download |
You will require "Adobe Reader" to read the PDF-files
 Delivery conditions |
Customized Ventilation fans |
|||
|
Aluminium (A) |
Cast-iron (B) |
Ventilation fans (C) |
Stator - Rotor (D) |
Fan cowls (E) |
|
Terminal boards (G) |
Machine tool pumps (H) |
Brakes (L) |
Centrifugal fans |
Forced ventilation |
| Contact |
| For further information please contact us . . . |
 |